This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for demanding hydraulic applications requiring high performance and reliability.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.305" |
| Length | 16" |
| Width | 27" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.305 inches in thickness, 16 inches in width, and 27 inches in length. This aerospace-grade alloy provides an outstanding combination of high strength, low density, and excellent biocompatibility, exhibiting superior resistance to seawater and a wide range of corrosive media. Its mechanical properties make it a preferred material for components in high-pressure hydraulic systems where weight reduction and extreme durability are critical factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for surface defects or damage before machining. 2. Precisely cut to required dimensions using appropriate tooling for titanium alloys. 3. Ensure all mating surfaces are clean and free of contaminants prior to assembly into hydraulic components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate coatings or cooling. | Employ carbide or specialized titanium cutting tools with ample coolant and appropriate feed rates to prevent excessive heat buildup and tool wear. |
| Ignoring potential for work hardening during machining. | Utilize controlled machining parameters, including slower speeds and consistent, light cuts, to minimize work hardening and maintain material integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic cylinders and pistons, High-pressure hydraulic manifolds, Aerospace hydraulic line fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||