This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical components in pulling and lifting systems where reliability is paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.286" |
| Length | 14" |
| Width | 45" |
A high-performance industrial component, this Titanium Grade 5 stock sheet (0.286" thickness, 14" length, and 45" width) is engineered for extreme environments. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium, it achieves a high tensile strength of over 800 MPa and a yield strength exceeding 700 MPa, with excellent fatigue resistance. Its low density (approx. 4.5 g/cm³) makes it significantly lighter than steel while maintaining comparable structural integrity. This material is non-magnetic and exhibits superior resistance to saltwater and various corrosive chemicals, ensuring longevity in harsh industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended application is within the material's design specifications and environmental tolerances. 2. Precisely cut or shape the stock sheet to the required dimensions using appropriate cutting tools for titanium alloys (e.g., waterjet, EDM, or specialized milling techniques). 3. Securely fasten the fabricated component using compatible fasteners, considering galvanic corrosion potentials if dissimilar metals are involved.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication tools without proper adjustments, leading to tool wear and poor cut quality. | Utilize specialized tooling and techniques recommended for machining titanium alloys, ensuring adequate cooling and lubrication. |
| Failing to account for the thermal expansion coefficient of titanium during welding or high-temperature operations. | Implement appropriate preheating and post-weld heat treatment procedures, or use controlled welding environments to manage thermal stresses. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom structural components for offshore lifting equipment, Reinforcement plates in winches and hoists, Specialized end fittings for towing and pulling assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||