Engineered for extreme environments, this Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and unparalleled corrosion resistance for critical hydraulic systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.255" |
| Length | 16" |
| Width | 46" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet (0.255" thickness, 16" length, 46" width) is manufactured to exacting standards for superior performance in demanding hydraulic applications. Grade 5 titanium (Ti-6Al-4V) provides an optimal balance of high strength, low density, and excellent corrosion resistance, making it ideal for components exposed to aggressive media, high pressures, and extreme temperatures. Its biocompatibility and non-magnetic properties further enhance its utility in specialized hydraulic circuits where material inertness is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the hydraulic fluid and operating environment. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for titanium alloys. 3. Smooth and deburr all edges to prevent stress concentrations and ensure a clean fit within the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys. | Employ carbide or specialized diamond-tipped cutting tools designed for machining titanium to prevent tool wear and ensure clean cuts. |
| Inadequate edge preparation leading to stress risers. | Thoroughly deburr and radius all cut edges to mitigate potential crack initiation points under pressure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Corrosion-resistant hydraulic cylinder components, Seawater hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||