Engineered from high-performance Titanium Grade 5 alloy, this stock sheet provides exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical pulling and lifting applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.145" |
| Length | 48" |
| Width | 21" |
Built to exacting engineering tolerances, this 0.145" thick Titanium Grade 5 stock sheet measures 48" in length and 21" in width. Its Ti-6Al-4V composition ensures excellent tensile strength, fatigue resistance, and biocompatibility, making it suitable for environments requiring extreme durability and low density. This material is widely specified for aerospace components, marine hardware, and high-performance industrial equipment where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material suitability for the intended application and load conditions. 2. Ensure all cutting, drilling, or forming processes maintain material integrity and dimensional accuracy. 3. Implement appropriate joining techniques (e.g., welding, fastening) according to industry best practices for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without considering titanium's specific properties. | Employ specialized tooling and procedures designed for titanium, such as increased cutting speeds and flood coolant, to prevent overheating and tool wear. |
| Inadequate surface preparation prior to joining or coating. | Thoroughly clean the titanium surface to remove any oxides, oils, or contaminants that could compromise the integrity of welds or adhesion of coatings. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Specialized lifting apparatus components, Reinforcement plates for heavy-duty rigging, Custom-fabricated structural elements in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||