This Titanium Grade 5 stock sheet is engineered for extreme pulling and lifting demands. Its exceptional strength, corrosion resistance, and lightweight properties make it the premier choice for critical structural components.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.782" |
| Length | 39" |
| Width | 32" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet boasts a thickness of 0.782 inches, a width of 32 inches, and a length of 39 inches. Exhibiting a minimum tensile strength of 128,000 psi and a yield strength of 116,000 psi, it offers an unparalleled strength-to-weight ratio. Its biocompatibility and resistance to saltwater corrosion make it ideal for marine environments, aerospace components, and high-stress industrial machinery where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional tolerances against design specifications. 2. Ensure all mating surfaces are clean and free of contaminants. 3. Follow approved welding or joining procedures for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard welding rods not designed for Titanium Grade 5. | Utilize ERTi-5 or equivalent filler material specifically formulated for Titanium Grade 5 to ensure weld integrity and prevent embrittlement. |
| Inadequate post-weld heat treatment in critical applications. | Implement specified post-weld heat treatment to relieve residual stresses and maintain optimal mechanical properties, especially in fatigue-sensitive components. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heavy-duty winch components, Structural supports for lifting cranes, Marine towing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||