Engineered for extreme environments, this Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical pulling and lifting components in aerospace and industrial sectors.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.245" |
| Length | 14" |
| Width | 28" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.245 inches, a length of 14 inches, and a width of 28 inches. Exhibiting a minimum tensile strength of 130 ksi and yield strength of 120 ksi, its alpha-beta microstructure ensures excellent performance under high stress and fatigue loads. Ideal for fabricating custom rigging hardware, crane components, and offshore equipment where extreme durability and low density are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to cutting. 2. Employ appropriate cutting methods (e.g., waterjet, EDM) designed for titanium alloys. 3. Ensure all fabricated components meet design tolerances and finish requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to tool wear and suboptimal cuts. | Utilize specialized cutting tools and techniques designed for titanium alloys to ensure precision and prolong tool life. |
| Inadequate post-fabrication cleaning, leading to potential surface contamination. | Thoroughly clean all surfaces after fabrication using appropriate degreasers and non-abrasive methods to maintain material integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom rigging hardware fabrication, High-stress lifting component manufacturing, Aerospace structural components for payload handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||