This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical components in demanding heating and cooling environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.894" |
| Length | 25" |
| Width | 22" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) alloy stock sheet measures 0.894 inches thick, 25 inches in length, and 22 inches in width. Exhibiting excellent tensile strength, fatigue resistance, and biocompatibility, this aerospace-grade material is highly valued for its ability to withstand extreme temperatures and corrosive media. Its low density and high specific strength make it a preferred choice for heat exchangers, critical ductwork, and structural components within advanced HVAC and industrial process heating/cooling systems where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Use appropriate welding procedures for Titanium Grade 5, such as TIG welding in an inert gas atmosphere. 3. Verify dimensional accuracy and structural integrity after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables or atmosphere for Titanium Grade 5. | Always use Ti-6Al-4V specific filler materials and maintain a high-purity inert gas shield (e.g., Argon) during welding to prevent contamination and maintain material integrity. |
| Overheating the material during fabrication processes. | Implement controlled heating and cooling cycles to avoid grain growth and embrittlement. Consult material data sheets for recommended temperature ranges. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-efficiency heat exchangers, Corrosive fluid containment in HVAC, Lightweight, high-strength ducting systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||