This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical components in advanced heating and cooling systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.383" |
| Length | 24" |
| Width | 36" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.383 inches thick, 24 inches in width, and 36 inches in length. It exhibits excellent biocompatibility, fatigue strength, and resistance to a wide range of corrosive environments, including saltwater and industrial chemicals. The alloy's high operating temperature makes it suitable for heat exchangers, cryogenic applications, and other severe service conditions. Precision tolerances ensure consistent performance and fitment in demanding thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of debris. 2. Cut sheet to precise dimensions using appropriate tooling for titanium alloys. 3. Fabricate and assemble components following established engineering drawings and welding procedures for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize specialized carbide or high-speed steel tooling with appropriate feeds and speeds to prevent overheating and material damage. |
| Inadequate weld preparation or incorrect shielding gas during fabrication. | Thoroughly clean and degrease all joint areas. Use argon or a helium/argon mixture as a shielding gas to prevent oxidation and embrittlement during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Components, Cryogenic Vessels, Corrosion-Resistant Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||