This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical components in demanding heating and cooling systems.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.549" |
| Length | 15" |
| Width | 37" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.549 inches thick, 15 inches in length, and 37 inches in width. Grade 5 titanium exhibits excellent tensile strength, fatigue resistance, and biocompatibility, with a density approximately 60% that of steel. Its passivation layer provides robust protection against aggressive media, ensuring longevity in corrosive environments. This material is commonly specified for heat exchangers, structural components in high-temperature systems, and specialized ductwork where performance and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the operating environment. 2. Ensure all cutting and fabrication processes maintain material integrity and surface cleanliness. 3. Implement appropriate welding procedures for titanium, utilizing inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard welding techniques without inert gas shielding. | Always use argon or helium shielding gas during welding to prevent atmospheric contamination and embrittlement. |
| Improper surface preparation before welding or joining. | Thoroughly degrease and mechanically clean all surfaces to remove oxides and contaminants, which can compromise joint strength. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Tubing and Plates, High-Temperature Ducting and Fan Components, Corrosion-Resistant Structural Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||