This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for robust pulling and lifting components in harsh environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.210" |
| Length | 41" |
| Width | 44" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet exhibits excellent tensile strength (minimum 120 ksi) and yield strength (minimum 110 ksi) at a density of 0.160 lb/in³. The specified dimensions of 0.210 inches (5.33 mm) thickness, 41 inches (1041 mm) length, and 44 inches (1118 mm) width provide a substantial surface area for fabrication into critical structural elements for lifting devices, rigging hardware, and specialized pulling equipment. Its biocompatibility and non-magnetic properties further expand its utility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any surface contamination. 2. Precisely cut or machine the sheet to the required component dimensions using appropriate tooling for titanium alloys. 3. Fabricate or weld the component according to design specifications, adhering to best practices for titanium welding if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper coolant and speed settings. | Utilize specialized carbide or high-speed steel tooling designed for titanium, along with appropriate coolants and adjusted feed/speed rates to prevent excessive heat buildup and tool wear. |
| Inadequate preparation for welding, leading to porosity or embrittlement. | Thoroughly clean and degrease the weld joint, and ensure a controlled inert gas shielding (e.g., Argon) during the welding process to prevent atmospheric contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom lifting slings and hardware, High-stress structural components for cranes and hoists, Specialized towing and pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||