This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and unparalleled corrosion resistance, making it the premier choice for critical heating and cooling systems and industrial fabrication.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.949" |
| Length | 47" |
| Width | 22" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.949 inches in thickness, 47 inches in length, and 22 inches in width. Known for its excellent biocompatibility, high tensile strength, and superior resistance to oxidation and corrosion in aggressive environments, this alloy is critical for heat exchangers, pressure vessels, and components exposed to extreme temperatures and corrosive media within HVAC and industrial processes. It meets rigorous ASTM B265 standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Utilize appropriate welding or joining techniques for titanium alloys, such as TIG welding with inert gas shielding. 3. Implement proper post-weld heat treatment if required by the application to relieve residual stresses and optimize material properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding consumables and procedures. | Always use titanium-specific welding rods and follow best practices for inert gas shielding to prevent contamination and ensure weld integrity. |
| Insufficient surface preparation before joining. | Thoroughly degrease and mechanically clean all titanium surfaces to remove oxides and contaminants before any welding or bonding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-efficiency heat exchangers, Corrosion-resistant piping and ductwork for HVAC, Pressure vessels for industrial chemical processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||