This substantial Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical pulling and lifting applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.919" |
| Length | 37" |
| Width | 39" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.919 inches in thickness, 37 inches in length, and 39 inches in width. This aerospace-grade alloy exhibits a tensile strength typically exceeding 130 ksi and a yield strength over 120 ksi, with excellent fatigue strength and resistance to saltwater and chlorides. Its low density (approximately 4.5 g/cm³) ensures reduced weight in fabricated components. Suitable for fabricating custom pulleys, winch drums, load-bearing structural elements, and specialized lifting hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining operations are performed with appropriate tooling and lubrication suitable for titanium alloys. 2. Prepare edges for welding or fastening according to design specifications, maintaining cleanliness to prevent contamination. 3. Integrate into the pulling or lifting system, verifying load ratings and operational parameters before engaging.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Utilize carbide or high-speed steel tooling with flood coolant and reduced cutting speeds to manage heat and tool wear. |
| Inadequate surface preparation before welding or bonding. | Thoroughly degrease and clean all surfaces using appropriate solvents to ensure optimal joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom Pulley Manufacturing, Winch and Hoist Components, Specialized Lifting Fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||