This Titanium Grade 5 stock sheet is engineered for critical pressure and temperature control systems. Its superior strength-to-weight ratio and exceptional corrosion resistance make it the material of choice for extreme environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.848" |
| Length | 34" |
| Width | 35" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers exceptional mechanical properties. With a thickness of 0.848 inches, a length of 34 inches, and a width of 35 inches, it meets stringent industry standards for aerospace, chemical processing, and high-performance fluid handling. Its excellent biocompatibility and resistance to oxidation at elevated temperatures ensure reliable performance in corrosive media and under significant pressure fluctuations. Tensile strength typically exceeds 130 ksi and yield strength surpasses 120 ksi, with a density of approximately 4.43 g/cm³.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure material is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and forming techniques for titanium alloys, considering tool wear. 3. Implement proper welding procedures (if applicable) using inert gas shielding to prevent contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tooling for cutting or forming. | Employ specialized tooling designed for titanium alloys, often featuring carbide or diamond coatings, and ensure adequate lubrication. |
| Inadequate weld shielding gas during fabrication. | Utilize a high-purity Argon or Helium shielding gas mixture with proper flow rates to prevent embrittlement and ensure weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Aerospace heat exchangers, Corrosive fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||