This Titanium Grade 5 stock sheet offers superior strength and corrosion resistance, essential for high-performance hydraulic systems. Precisely manufactured to exacting dimensional standards.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.324" |
| Length | 35" |
| Width | 47" |
A proven choice for industrial professionals, this Titanium Grade 5 stock sheet boasts a thickness of 0.324 inches, a length of 35 inches, and a width of 47 inches. Composed of Ti-6Al-4V alloy, it delivers an exceptional strength-to-weight ratio, excellent fatigue strength, and superior corrosion resistance, particularly in aggressive chemical and saltwater environments. These properties make it ideal for critical hydraulic components such as cylinder barrels, valve bodies, and manifold blocks where reliability and longevity under extreme pressure and corrosive conditions are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Utilize appropriate cutting and machining techniques for titanium alloys. 3. Follow industry-standard welding procedures if joining is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ specialized tooling and slower cutting speeds designed for titanium to prevent overheating and tool damage. |
| Inadequate surface preparation before welding. | Thoroughly clean and degrease the joint area to prevent weld contamination, which can compromise structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Cylinder Barrels, High-Pressure Valve Components, Corrosion-Resistant Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||