This Titanium Grade 5 stock sheet offers exceptional strength, lightweight properties, and superior corrosion resistance, making it the premier choice for critical heating and cooling system components.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.426" |
| Length | 21" |
| Width | 30" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet, measuring 0.426 inches thick, 21 inches in length, and 30 inches in width, provides a robust material solution. Its excellent biocompatibility, high tensile strength, and remarkable resistance to corrosive media make it indispensable for heat exchangers, cryogenics, and high-temperature fluid handling in HVAC and industrial process cooling. The alloy's performance is characterized by its ability to withstand extreme temperature fluctuations and pressures with minimal degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining operations are performed using appropriate tooling and lubrication for titanium. 2. Clean surfaces thoroughly to remove any contaminants before assembly or welding. 3. Follow established welding procedures for Titanium Grade 5, utilizing inert gas shielding (e.g., Argon) to prevent oxidation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper lubrication. | Utilize carbide or specialized titanium cutting tools and apply liberal amounts of cutting fluid to prevent overheating and tool wear. |
| Inadequate weld shielding leading to porosity and embrittlement. | Employ a robust inert gas shielding system (e.g., Argon) with sufficient flow rates to protect the weld puddle and surrounding heat-affected zone from atmospheric contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchangers, Cryogenic Piping & Vessels, Corrosion-Resistant Fluid Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||