This Titanium Grade 5 stock sheet is engineered for demanding environments. Offering exceptional strength, low density, and superior corrosion resistance, it's the material of choice for critical pressure and temperature control systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.178" |
| Length | 41" |
| Width | 46" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.178 inches thick, 41 inches in length, and 46 inches in width. Its unique alloy composition provides an outstanding strength-to-weight ratio, excellent fatigue strength, and exceptional resistance to corrosive media across a wide temperature range. This makes it ideal for components within high-pressure vessels, heat exchangers, and critical fluid handling systems in aerospace, chemical processing, and marine industries where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free from contaminants. 2. Fabricate components according to precise engineering drawings, adhering to welding procedures specific to Titanium Grade 5. 3. Perform non-destructive testing (NDT) as per industry standards to verify weld integrity and material soundness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper welding of Titanium Grade 5 without inert gas shielding. | Always use a full inert gas (argon) purge on both sides of the weld joint to prevent atmospheric contamination and embrittlement. |
| Using standard carbon steel tooling for cutting or machining. | Employ dedicated tooling with appropriate coatings and lubrication designed for titanium alloys to prevent galling and excessive heat buildup. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Pressure vessel shells and heads, Heat exchanger components, High-temperature ducting and piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||