This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and biocompatibility. Precisely manufactured to 0.449" thickness, 36" length, and 30" width, it's engineered for critical applications demanding utmost reliability.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.449" |
| Length | 36" |
| Width | 30" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.449 inches, a length of 36 inches, and a width of 30 inches. This alloy provides excellent tensile strength, fatigue resistance, and superior corrosion resistance across a wide range of environments, including saltwater and chemical exposures. Its biocompatibility makes it suitable for demanding medical implants, while its high strength and low density are critical for aerospace components, high-performance automotive parts, and industrial equipment operating under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application. 2. Ensure all cutting, shaping, and joining processes adhere to industry best practices for Titanium Grade 5. 3. Perform thorough post-processing inspections, including non-destructive testing if required by application standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without adaptation for titanium's unique properties. | Employ specialized tooling, lubricants, and slower machining speeds when working with Titanium Grade 5 to prevent tool wear and material overheating. |
| Inadequate surface preparation prior to welding or bonding. | Thoroughly clean and degrease the surface using appropriate solvents to remove any contaminants that could compromise joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||