This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to stringent industrial standards, it's ideal for critical component fabrication.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.925" |
| Length | 15" |
| Width | 37" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.925 inches, a length of 15 inches, and a width of 37 inches. Exhibiting a minimum tensile strength of 128 ksi and yield strength of 116 ksi, its excellent fatigue strength and biocompatibility make it suitable for aerospace, medical implants, marine environments, and high-performance automotive parts where extreme durability and low density are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and machining equipment is calibrated for titanium alloys. 2. Utilize appropriate lubrication and coolant during fabrication processes. 3. Follow established welding procedures for Titanium Grade 5, if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ specialized carbide or high-speed steel tooling with appropriate speeds, feeds, and coolant to prevent premature wear and ensure clean cuts. |
| Inadequate surface preparation before welding or bonding. | Thoroughly clean the surface with a degreaser and wire brush to remove any oxides or contaminants that could compromise joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants (orthopedic, dental), Marine hardware and subsea equipment, High-performance automotive parts, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||