This Titanium Grade 5 stock sheet is engineered for extreme environments. Its superior strength-to-weight ratio and exceptional corrosion resistance make it ideal for critical pulling and lifting applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.486" |
| Length | 20" |
| Width | 32" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) sheet offers a nominal thickness of 0.486 inches, a length of 20 inches, and a width of 32 inches. This aerospace-grade alloy boasts an ultimate tensile strength of approximately 130-140 ksi and a yield strength of 120 ksi, providing exceptional structural integrity under high loads. Its inherent passivation layer ensures outstanding resistance to a wide range of corrosive media, making it suitable for marine, chemical processing, and offshore industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free of contaminants, and properly prepared according to design specifications. 2. Utilize appropriate fastening methods, such as welding or bolting with compatible hardware, ensuring compliance with relevant industry codes (e.g., ASME, AWS). 3. Conduct non-destructive testing (NDT) as required by application standards to verify the integrity of the installed component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners or welding consumables. | Always specify and use fasteners and welding filler materials that are certified for use with Titanium Grade 5 to prevent galvanic corrosion and ensure structural integrity. |
| Improper heat treatment after welding, leading to reduced mechanical properties. | Follow recommended post-weld heat treatment procedures for Titanium Grade 5, if applicable, to restore ductility and toughness in the heat-affected zone. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Offshore structural components for lifting equipment, Specialized marine towing hardware, High-stress industrial pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||