This Titanium Grade 5 stock sheet, precisely machined to 0.454" x 19" x 23", offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical heating and cooling systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.454" |
| Length | 19" |
| Width | 23" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet meets aerospace and industrial standards. With a thickness of 0.454 inches, length of 19 inches, and width of 23 inches, it exhibits a yield strength exceeding 128 ksi and an ultimate tensile strength of 138 ksi. Its excellent biocompatibility and resistance to high temperatures and corrosive media make it a preferred material for heat exchangers, critical piping, and components in aggressive chemical processing environments within the heating and cooling sector.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material integrity and dimensions against engineering drawings. 2. Prepare mating surfaces for welding or joining, ensuring cleanliness and proper fit-up. 3. Execute joining procedures according to certified welding specifications for Titanium Grade 5, ensuring full penetration and absence of defects.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding procedures for titanium. | Always employ inert gas shielded welding (GTAW/TIG or GMAW/MIG) with appropriate argon shielding gas and specialized titanium filler metals to prevent atmospheric contamination and embrittlement. |
| Inadequate surface preparation leading to contamination. | Thoroughly degrease and mechanically clean all titanium surfaces using dedicated stainless steel brushes or abrasive pads that have not been used on other metals. Avoid chemical pickling unless specified and performed by qualified personnel. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-efficiency heat exchanger fabrication, Corrosion-resistant piping for chemical processing, Components for cryogenic cooling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||