This high-performance Titanium Grade 5 stock sheet is engineered for critical heating and cooling systems. Its exceptional strength, low density, and superior corrosion resistance make it the material of choice for demanding environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.588" |
| Length | 26" |
| Width | 27" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers superior mechanical properties for extreme operational conditions. With a precise thickness of 0.588 inches, a width of 27 inches, and a length of 26 inches, it meets stringent dimensional tolerances. Grade 5 titanium exhibits an excellent strength-to-weight ratio, high tensile strength, and exceptional resistance to oxidation and corrosion, particularly in aggressive media common in advanced heating and cooling circuits, heat exchangers, and aerospace components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of any contaminants before fabrication. 2. Utilize appropriate machining and welding procedures for titanium alloys to maintain material integrity. 3. Verify dimensional accuracy and structural integrity after installation through non-destructive testing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding techniques. | Employ inert gas shielded welding (e.g., TIG or MIG) with argon shielding gas to prevent contamination and maintain the alloy's properties. |
| Inadequate surface preparation before joining. | Thoroughly degrease and mechanically clean the joint area, removing all oxides and surface imperfections to ensure a sound weld or bond. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-efficiency heat exchangers, Cryogenic cooling systems, Corrosive fluid handling in HVAC.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||