This Titanium Grade 5 stock sheet is engineered for extreme environments. Its exceptional strength-to-weight ratio and unparalleled corrosion resistance make it ideal for critical pressure and temperature control systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.994" |
| Length | 47" |
| Width | 45" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.994 inches thick, 47 inches in length, and 45 inches in width. Exhibiting a tensile strength typically exceeding 130 ksi and excellent fatigue strength, it is well-suited for applications requiring high performance in corrosive and high-temperature conditions. Its biocompatibility and low thermal expansion also contribute to its versatility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from contaminants. 2. Apply appropriate sealant or gasket material as per system specifications. 3. Secure the sheet using approved fastening methods, adhering to torque requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to seal failure. | Thoroughly degrease and clean all surfaces that will come into contact with the sheet. |
| Over-tightening fasteners, causing localized stress concentrations. | Utilize calibrated torque wrenches and follow recommended tightening sequences. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Cryogenic system components, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||