This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-temperature, corrosive environments within the heating and cooling industry.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.969" |
| Length | 44" |
| Width | 32" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a precise thickness of 0.969 inches, a length of 44 inches, and a width of 32 inches. Its composition offers excellent biocompatibility and fatigue strength, crucial for critical heat exchanger components and specialized ductwork in corrosive atmospheres. The material's inherent thermal stability and low thermal expansion coefficient contribute to reliable performance under extreme temperature cycling and pressure variations, ensuring long-term operational integrity in HVAC systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of contaminants before fabrication. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as TIG welding in an inert gas atmosphere. 3. Carefully machine and form the sheet to the required dimensions, adhering to industry standards for titanium fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding techniques. | Always use inert gas shielded welding (e.g., TIG) with proper preheating and post-weld cooling to prevent contamination and embrittlement. |
| Improper cleaning of surfaces before welding or forming. | Thoroughly degrease and brush the titanium surface with stainless steel brushes dedicated solely to titanium to avoid cross-contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Components, Corrosion-Resistant Ductwork, High-Temperature HVAC Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||