This premium Titanium Grade 5 stock sheet is engineered for superior performance in demanding plumbing and janitorial environments. Its exceptional strength and corrosion resistance ensure longevity and reliability.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.887" |
| Length | 41" |
| Width | 37" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.887 inches thick, 41 inches in length, and 37 inches in width. Exhibiting a minimum tensile strength of 130 ksi and a yield strength of 120 ksi, this alloy offers an outstanding strength-to-weight ratio and superior resistance to a wide range of corrosive media, including chlorides and acids. Its biocompatibility and non-magnetic properties further enhance its suitability for critical applications where purity and safety are paramount. Ideal for custom fabrication of specialized piping, tanks, and equipment in chemical processing and high-purity water systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of contaminants. 2. Fabricate components according to design specifications using appropriate welding or joining techniques for Titanium Grade 5. 3. Perform thorough post-installation inspection and testing to verify integrity and leak-tightness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding procedures. | Employ specialized welding procedures for titanium, including inert gas shielding (e.g., Argon) and pre-heating to prevent embrittlement. |
| Inadequate surface preparation before joining. | Thoroughly degrease and clean all surfaces to be joined, removing any oxides or contaminants that could compromise weld quality. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Corrosion-resistant piping systems, Specialized tanks and vessels, High-purity water handling components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||