This premium Titanium Grade 5 stock sheet offers exceptional strength and corrosion resistance. Precisely manufactured to industry standards, it's ideal for critical applications demanding superior performance and durability.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.876" |
| Length | 36" |
| Width | 34" |
A high-performance industrial component, this Titanium Grade 5 stock sheet features precise dimensions of 0.876 inches in thickness, 36 inches in length, and 34 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium, it exhibits an excellent strength-to-weight ratio, superior corrosion resistance in aggressive environments, and good weldability. Its operational temperature range extends to approximately 600°F (315°C). This material meets stringent aerospace and medical standards due to its biocompatibility and fatigue strength, making it suitable for a wide array of demanding industrial uses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of contaminants. 2. Verify material compatibility with surrounding components and intended operating environment. 3. Fabricate and install according to project-specific engineering drawings and best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for Titanium Grade 5. | Utilize inert gas shielding (e.g., Argon) and clean, dry filler materials specific to Ti-6Al-4V alloys to prevent contamination and embrittlement. |
| Subjecting the material to excessive heat during processing without proper control. | Implement controlled heating and cooling cycles to avoid grain growth and maintain mechanical properties. Annealing may be required post-fabrication. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||