This Titanium Grade 5 stock sheet offers superior corrosion resistance and exceptional strength-to-weight ratio, making it a critical material for severe service in heating and cooling systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.817" |
| Length | 37" |
| Width | 22" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.817 inches thick, 37 inches in length, and 22 inches in width. Exhibiting excellent tensile strength, creep resistance, and a remarkable resistance to oxidizing and reducing agents, it is well-suited for extreme temperature environments and corrosive media commonly found in advanced HVAC and heat exchanger designs. Its biocompatibility and low thermal expansion further enhance its utility in specialized industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Fabricate to precise dimensions using appropriate cutting and forming techniques for titanium alloys. 3. Employ suitable welding procedures, such as TIG welding with inert gas shielding, if joining is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication tools without proper adjustments. | Utilize specialized tooling and speeds/feeds for titanium machining to prevent tool wear and material work hardening. |
| Inadequate pre-cleaning before welding. | Thoroughly degrease and remove any surface oxides from the weld joint area prior to welding to ensure weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchangers, Condenser Tubing, Corrosion-Resistant Ductwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||