This Titanium Grade 5 stock sheet is engineered for extreme environments. Its superior strength-to-weight ratio and exceptional corrosion resistance make it ideal for critical pressure and temperature control systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.810" |
| Length | 26" |
| Width | 38" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a nominal thickness of 0.810 inches, a length of 26 inches, and a width of 38 inches. Grade 5 titanium offers an excellent combination of high strength, low density, and outstanding corrosion resistance, particularly in oxidizing environments. This alloy is widely utilized in aerospace, medical implants, and chemical processing equipment where reliability under severe pressure and temperature fluctuations is paramount. Its excellent fatigue strength and biocompatibility further enhance its suitability for critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from contaminants. 2. Use appropriate fasteners designed for titanium alloys to avoid galvanic corrosion. 3. Follow recommended torque specifications for secure assembly, preventing over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners without proper coating or compatibility checks. | Utilize aerospace-grade titanium or suitable stainless steel fasteners with appropriate surface treatments to prevent galvanic corrosion and ensure long-term integrity. |
| Improper machining techniques leading to excessive heat buildup. | Employ specialized cutting fluids and slower machining speeds with sharp tooling when working with Titanium Grade 5 to manage heat and prevent material degradation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel fabrication, Cryogenic component manufacturing, Heat exchanger plates and frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||