Engineered from high-performance Titanium Grade 5, this stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for critical components in pressure and temperature control systems where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.775" |
| Length | 32" |
| Width | 30" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet boasts a nominal thickness of 0.775 inches, a length of 32 inches, and a width of 30 inches. Exhibiting a minimum tensile strength of 128 ksi and yield strength of 116 ksi, it is an excellent choice for applications demanding high operational integrity under extreme pressure and temperature fluctuations. Its inherent biocompatibility and resistance to chloride-induced stress corrosion cracking further enhance its suitability for challenging environments, including chemical processing, aerospace, and marine sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants prior to fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys to maintain material integrity. 3. Implement welding procedures specific to Titanium Grade 5, employing inert gas shielding (e.g., Argon) to prevent oxidation and embrittlement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling without proper lubrication or heat management, leading to tool wear and potential material work-hardening. | Employ specialized carbide or cobalt tooling, ample lubrication, and controlled cutting speeds to mitigate excessive heat generation and maintain material ductility. |
| Inadequate shielding during welding, resulting in porous welds and reduced mechanical properties due to atmospheric contamination. | Strictly adhere to inert gas shielding protocols (e.g., 100% Argon) with appropriate flow rates and torch standoff distances to ensure a clean, high-integrity weld. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure vessel components, Heat exchanger plates, Cryogenic system fabrication, Aerospace structural parts, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||