This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-pressure hydraulic systems where reliability is paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.751" |
| Length | 20" |
| Width | 14" |
Precision-manufactured to tight tolerances, this 0.751" thick, 20" long, and 14" wide Titanium Grade 5 (Ti-6Al-4V) sheet provides a robust foundation for critical hydraulic components. Its inherent biocompatibility and excellent fatigue strength ensure longevity in aggressive environments, resisting saltwater, chloride, and various industrial chemicals. This alloy's high tensile strength and yield strength, coupled with its low density, translate to lighter, more efficient hydraulic machinery, crucial for aerospace, marine, and specialized industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both mating surfaces to remove any contaminants. 2. Ensure proper alignment with existing hydraulic manifold components. 3. Secure using appropriate fasteners and torque specifications as per hydraulic system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can lead to galvanic corrosion. | Utilize fasteners made from compatible materials, such as titanium alloys or specific grades of stainless steel, as recommended by the hydraulic system design. |
| Over-machining or excessive heat during fabrication, potentially altering the material's properties. | Employ controlled machining practices with adequate cooling to maintain the integrity of the Titanium Grade 5 microstructure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Actuator housings in corrosive environments, Submersible hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||