This Titanium Grade 5 stock sheet is engineered for extreme environments within Heating & Cooling systems. Its robust composition ensures exceptional performance and longevity in demanding thermal and corrosive conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.741" |
| Length | 14" |
| Width | 12" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers a critical 0.741" thickness, 14" length, and 12" width. Renowned for its superior strength-to-weight ratio (approximately 6 times that of steel), excellent corrosion resistance, biocompatibility, and high tensile strength (around 138,000 psi), it's ideal for heat exchangers, critical piping, and structural components in aerospace and industrial heating/cooling infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants. 2. Accurately cut to required dimensions using appropriate cutting tools for titanium. 3. Fabricate and install according to project-specific engineering drawings and welding procedures, if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized carbide or diamond-tipped cutting tools with proper coolant lubrication to prevent overheating and tool wear. |
| Inadequate surface preparation before welding or bonding. | Thoroughly degrease and clean the titanium surface using appropriate solvents to ensure optimal weld integrity and adhesion. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-temperature heat exchangers, Corrosion-resistant piping systems, Cryogenic fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||