This Titanium Grade 5 stock sheet offers superior corrosion resistance and exceptional strength-to-weight ratio, ideal for critical components in advanced heating and cooling systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.682" |
| Length | 41" |
| Width | 46" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.682 inches thick, 41 inches in length, and 46 inches in width. Its excellent biocompatibility, high tensile strength, and resistance to chloride-induced corrosion make it indispensable for heat exchangers, condensers, evaporators, and structural elements in aggressive chemical or high-temperature environments. The alloy's inherent durability ensures longevity and reliable performance under extreme operational stresses, contributing to extended equipment lifespan and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Utilize appropriate welding procedures for Titanium Grade 5, such as TIG welding in an inert gas atmosphere. 3. Carefully inspect all welds for integrity and adherence to dimensional tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel welding consumables. | Always use titanium-specific welding wire and shielding gases to prevent contamination and ensure weld integrity. |
| Improper surface preparation before welding. | Thoroughly clean and degrease the titanium surface to remove any oxides or contaminants that could compromise the weld quality. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Tubing and Plates, Condenser and Evaporator Components, Corrosion-Resistant Piping and Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||