This Titanium Grade 5 stock sheet, precisely machined to 0.613" x 25" x 34", offers exceptional strength-to-weight ratio and superior corrosion resistance, making it the premier choice for high-pressure hydraulic applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.613" |
| Length | 25" |
| Width | 34" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts dimensions of 0.613" nominal thickness, 25" length, and 34" width. This aerospace-grade alloy exhibits excellent tensile strength, fatigue resistance, and biocompatibility, ensuring robust operation in corrosive environments. Its high performance is critical for demanding hydraulic components such as accumulator housings, high-pressure cylinder bodies, and valve components where material integrity under extreme stress is paramount. Compliance with relevant aerospace and industrial standards is maintained.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating environment. 2. Ensure all cutting and machining operations are performed using appropriate tooling and procedures to maintain material integrity. 3. Implement proper welding or joining techniques as per industry best practices for Titanium Grade 5 to ensure structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without accounting for titanium's unique properties. | Employ specialized tooling, lubricants, and controlled heat input during machining and welding to prevent material degradation and maintain desired mechanical properties. |
| Inadequate surface preparation before joining or coating. | Thoroughly clean and degrease all surfaces to remove contaminants that could compromise joint strength or coating adhesion. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Corrosion-resistant hydraulic cylinder barrels, Aircraft hydraulic system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||