This high-performance Titanium Grade 5 stock sheet offers exceptional strength, lightweight characteristics, and superior corrosion resistance, making it the premier choice for critical hydraulic system components.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.599" |
| Length | 44" |
| Width | 38" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet precisely meets the rigorous demands of advanced hydraulic systems. Dimensions of 0.599" thickness, 44" length, and 38" width ensure compatibility with complex manifold designs and pressure vessels. Grade 5 (Ti-6Al-4V) exhibits an excellent balance of high tensile strength, fracture toughness, and fatigue resistance, alongside remarkable inertness to corrosive fluids and environments common in hydraulic operations. Its low density further contributes to weight reduction in aerospace and marine hydraulics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against design specifications. 2. Ensure all machining surfaces are clean and free from contaminants. 3. Utilize appropriate tooling and cutting fluids designed for titanium alloys during fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel machining practices on titanium. | Employ specialized tooling, slower speeds, and higher feed rates with appropriate lubrication to prevent work hardening and tool breakage. |
| Insufficient inspection for surface defects. | Conduct thorough visual and non-destructive testing (NDT) to identify any cracks, porosity, or inclusions that could compromise structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Cylinder barrels and pistons, Hydraulic fluid reservoirs and accumulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||