This high-performance Titanium Grade 5 stock sheet is engineered for critical heating and cooling systems. Its exceptional strength-to-weight ratio and superior corrosion resistance make it ideal for extreme environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.578" |
| Length | 20" |
| Width | 37" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.578 inches thick, 20 inches in length, and 37 inches in width. This alloy offers an excellent combination of high strength, low density, and outstanding corrosion resistance, particularly in oxidizing and chloride environments. Its biocompatibility and excellent fatigue strength ensure long-term reliability in demanding thermal management systems, heat exchangers, and process equipment operating under severe conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environmental conditions. 2. Ensure all cutting, shaping, and joining processes adhere to industry best practices for Titanium Grade 5. 3. Implement appropriate welding procedures and post-weld heat treatments as specified by engineering design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fabrication techniques without accounting for titanium's unique properties. | Employ specialized tooling and techniques for cutting, machining, and welding titanium to prevent tool wear and ensure material integrity. |
| Insufficient surface preparation before joining or coating. | Thoroughly clean the titanium surface to remove oxides, contaminants, and any residual lubricants to ensure proper adhesion and weld quality. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-temperature heat exchangers, Corrosion-resistant process piping, Specialized thermal management components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||