High-performance Titanium Grade 5 stock sheet engineered for superior strength, exceptional corrosion resistance, and lightweight characteristics in demanding hydraulic systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.552" |
| Length | 34" |
| Width | 45" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet (ASTM B265 Grade 5) offers a nominal thickness of 0.552 inches, a length of 34 inches, and a width of 45 inches. Titanium Grade 5 (Ti-6Al-4V) boasts an exceptional strength-to-weight ratio, reaching tensile strengths typically above 120 ksi, while maintaining excellent ductility and fatigue strength. Its inherent passivation layer provides superior resistance to a wide range of corrosive media, making it ideal for high-pressure hydraulic fluid environments, offshore equipment, and aerospace components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Follow industry-standard welding procedures for Ti-6Al-4V if required, ensuring inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fabrication tools without proper setup, leading to contamination or tool damage. | Employ specialized tooling and lubricants for titanium alloys to prevent galling and maintain material integrity. |
| Inadequate post-fabrication cleaning, leaving residual lubricants or debris that can compromise corrosive resistance. | Thoroughly clean all fabricated components with appropriate degreasers and rinse with deionized water before assembly. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifolds, Aerospace hydraulic components, Offshore oil and gas fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||