This robust Titanium Grade 5 stock sheet is engineered for high-pressure hydraulic systems. Its superior strength-to-weight ratio and exceptional corrosion resistance ensure longevity and reliability in demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.534" |
| Length | 42" |
| Width | 24" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.534 inches thick, 42 inches in length, and 24 inches in width. Exhibiting excellent tensile strength, fatigue resistance, and biocompatibility, it is ideal for critical hydraulic manifold blocks, pressure vessels, and custom component fabrication where high performance under extreme conditions is paramount. Its inherent resistance to saltwater and various chemical agents makes it a preferred material for marine and aerospace hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free of debris, and properly machined to specified tolerances. 2. Apply appropriate sealant or gasket material according to hydraulic system design specifications. 3. Carefully position the sheet and secure using designated fasteners, applying torque evenly as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and inspect all mating surfaces for imperfections before assembly. |
| Over-tightening fasteners, causing material deformation or stress concentrations. | Adhere strictly to the specified torque values and tightening sequence provided in the design documentation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Manifold Blocks, Pressure Vessels, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||