This Titanium Grade 5 stock sheet is engineered for extreme environments. Its exceptional strength-to-weight ratio and unparalleled corrosion resistance make it ideal for critical heating and cooling systems.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.526" |
| Length | 17" |
| Width | 30" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.526 inches in thickness, 17 inches in length, and 30 inches in width. Exhibiting a tensile strength typically exceeding 130 ksi and excellent fatigue resistance, Grade 5 titanium is the alloy of choice for applications demanding extreme durability and resistance to aggressive media, particularly in thermal management systems. Its biocompatibility and low thermal expansion further enhance its utility in specialized HVAC and process cooling environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare mating surfaces for welding or joining, ensuring a clean and oxide-free interface. 3. Employ appropriate welding techniques (e.g., TIG welding in an inert gas atmosphere) or mechanical fastening methods as dictated by the application's design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding procedures. | Employ specialized techniques for titanium welding, including inert gas shielding, to prevent contamination and ensure weld integrity. |
| Inadequate surface preparation before joining. | Thoroughly clean and degrease the titanium surface, removing any oxide layers or contaminants that could compromise the joint strength. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat exchanger components in corrosive environments, Chiller system piping and structural elements, High-temperature ductwork in industrial HVAC.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||