This Titanium Grade 5 stock sheet is engineered for superior performance in critical hydraulic systems. Offering exceptional strength-to-weight ratio and unparalleled corrosion resistance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.490" |
| Length | 14" |
| Width | 22" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet boasts a thickness of 0.490 inches, a length of 14 inches, and a width of 22 inches. Composed of Ti-6Al-4V alloy, it provides a minimum tensile strength of 120,000 psi and yield strength of 110,000 psi, with excellent fatigue strength and a wide operating temperature range. Its inherent biocompatibility and resistance to aggressive media make it ideal for high-pressure hydraulic components, marine systems, and aerospace fluid conveyance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris before fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Follow established welding procedures for Titanium Grade 5, ensuring inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive heat and work hardening. | Employ specialized carbide or cobalt tooling with appropriate cooling lubricants and reduced cutting speeds. |
| Inadequate weld shielding leading to oxidation and embrittlement of the weld zone. | Utilize a thorough inert gas purge (argon) for both the root and cover passes during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic manifold blocks, Corrosion-resistant hydraulic cylinder components, Aerospace fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||