Engineered for exceptional strength and corrosion resistance, this Titanium Grade 5 stock sheet is ideal for high-temperature and aggressive media environments within heating and cooling systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.486" |
| Length | 44" |
| Width | 30" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers superior strength-to-weight ratio and excellent resistance to oxidation and stress corrosion cracking. With precise dimensions of 0.486" thickness, 44" length, and 30" width, it meets stringent ASTM B265 standards for critical components in heat exchangers, pipework, and structural elements within HVAC and specialized industrial thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of contaminants. 2. Fabricate to precise design specifications using appropriate welding and forming techniques for Titanium Grade 5. 3. Install according to system design and applicable industry codes for high-integrity service.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners with titanium | Utilize titanium or compatible high-nickel alloy fasteners to prevent galvanic corrosion. |
| Inadequate pre-cleaning of the titanium surface before welding | Thoroughly degrease and mechanically clean the weld joint area to remove any oxide layers or surface impurities. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Plates and Tubes, Corrosion-Resistant Piping, Structural Components in High-Temperature Air Handling Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||