This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, engineered for critical pulling and lifting operations where performance and reliability are paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.434" |
| Length | 20" |
| Width | 47" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.434 inches thick, 20 inches in width, and 47 inches in length. Possessing a minimum tensile strength of 130 ksi and excellent fatigue resistance, it is ideally suited for aerospace, marine, and industrial applications requiring lightweight yet robust components for load-bearing and dynamic stress environments. Its biocompatibility also makes it suitable for specialized medical equipment fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is free from surface contaminants and defects. 2. Precisely cut to the required dimensions using appropriate cutting tools for titanium. 3. Mechanically fasten or weld according to application-specific engineering drawings and procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper adjustments. | Employ specialized carbide or diamond-tipped tooling designed for titanium to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly clean and degrease the weld zone, and consider inert gas shielding (e.g., Argon) to prevent oxidation and embrittlement. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Structural components in lifting equipment, Reinforcement plates for pulling mechanisms, Custom fabrication for extreme environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||