This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured for demanding applications requiring robust material performance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.408" |
| Length | 43" |
| Width | 43" |
Engineered for reliability and performance, this Titanium Grade 5 stock sheet boasts a thickness of 0.408 inches, a length of 43 inches, and a width of 43 inches. Composed of Ti-6Al-4V alloy, it exhibits a tensile strength typically exceeding 120 ksi and a yield strength over 110 ksi, with excellent fatigue resistance. Its low density (approximately 4.43 g/cm³) makes it suitable for weight-sensitive designs. This material is widely utilized in aerospace airframes and engine components, orthopedic implants due to its biocompatibility, and in chemical processing equipment for its inertness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface integrity before fabrication. 2. Employ appropriate cutting and machining techniques for titanium alloys, utilizing coolant. 3. Ensure proper welding procedures for Titanium Grade 5 are followed if required, including inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without adequate coolant. | Utilize specialized carbide or high-speed steel tooling designed for titanium and ensure consistent application of coolant to prevent tool breakage and overheating. |
| Inadequate inert gas shielding during welding. | Employ a robust argon or helium shielding gas system with proper flow rates and coverage to prevent atmospheric contamination of the weld zone, which can compromise mechanical properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||