This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance, making it ideal for critical components in harsh heating and cooling environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.357" |
| Length | 38" |
| Width | 42" |
Built to exacting engineering tolerances, this 0.357-inch thick Titanium Grade 5 (Ti-6Al-4V) sheet measures 38 inches in length and 42 inches in width. Its composition of approximately 6% aluminum and 4% vanadium in a titanium matrix provides outstanding mechanical properties, including high tensile strength and fatigue resistance, even at elevated temperatures. This makes it a preferred material for heat exchangers, pressure vessels, and structural components within demanding thermal management systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free of contaminants. 2. Verify sheet dimensions and specifications meet design requirements. 3. Implement appropriate fabrication techniques for titanium, such as welding or machining, following industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize specialized carbide or diamond-tipped tooling designed for machining hard metals like titanium to prevent tool wear and ensure clean cuts. |
| Neglecting proper cleaning procedures before welding. | Thoroughly degrease and clean the weld area with a suitable solvent to prevent contamination and ensure strong, defect-free welds. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat Exchanger Tubing & Plates, High-Temperature Ducting, Pressure Vessels in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||