This Titanium Grade 5 stock sheet is engineered for extreme hydraulic environments. Its superior strength-to-weight ratio and exceptional corrosion resistance ensure reliability in critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.356" |
| Length | 36" |
| Width | 43" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet offers exceptional performance in demanding hydraulic systems. With a thickness of 0.356 inches, a length of 36 inches, and a width of 43 inches, it provides substantial material for fabrication. Grade 5 (Ti-6Al-4V) alloy is renowned for its high tensile strength, excellent fatigue resistance, and superior corrosion resistance, particularly in chloride-rich environments. These properties make it ideal for high-pressure hydraulic components, marine hydraulics, and aerospace applications where weight savings and operational integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Cut to the required dimensions using appropriate cutting tools for titanium alloys. 3. Fabricate components according to design specifications, adhering to welding and machining best practices for Grade 5 titanium.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup. | Utilize carbide-tipped or high-speed steel cutting tools specifically designed for titanium alloys and ensure adequate lubrication and cooling. |
| Improper welding techniques leading to contamination. | Perform welding in an inert gas atmosphere (e.g., Argon) to prevent oxidation and embrittlement of the weld zone. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure hydraulic cylinders and manifolds, Marine hydraulic systems, Aerospace hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||