This robust Titanium Grade 5 stock sheet offers exceptional strength and corrosion resistance, ideal for fabricating critical components in demanding pulling and lifting systems where performance and reliability are paramount.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.349" |
| Length | 42" |
| Width | 32" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet provides a superior strength-to-weight ratio, crucial for minimizing dead load in lifting apparatus and enhancing the efficiency of pulling mechanisms. The material exhibits excellent fatigue strength and resistance to saltwater and chemical corrosion, ensuring prolonged service life in harsh environments. Its precise dimensions (0.349" thickness, 42" length, 32" width) facilitate seamless integration into custom-engineered solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and inspect for any surface defects or damage. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for titanium. 3. Prepare edges for welding or fastening according to design specifications, ensuring cleanliness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to tool wear and improper cuts. | Employ specialized carbide or diamond-tipped tooling designed for cutting titanium alloys, and utilize adequate lubrication. |
| Inadequate post-machining cleaning, leading to potential contamination and compromised corrosion resistance. | Thoroughly degrease and clean all surfaces after machining using an approved solvent for titanium. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom winch and hoist components, Structural supports for marine lifting equipment, Reinforcement plates for heavy-duty towing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||