This Titanium Grade 5 stock sheet is engineered for extreme environments within hydraulic systems. Its exceptional strength-to-weight ratio and superior corrosion resistance ensure longevity and optimal performance under high pressure.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.345" |
| Length | 32" |
| Width | 23" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.345 inches in thickness, 32 inches in length, and 23 inches in width. Titanium Grade 5 offers an unparalleled combination of high strength, low density, and excellent corrosion resistance, making it ideal for critical hydraulic components exposed to aggressive fluids and operating conditions. This material's biocompatibility and fatigue strength further enhance its suitability for demanding applications where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, maintaining proper torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and degrease all mating surfaces before installation to ensure a robust seal. |
| Over-tightening fasteners, potentially damaging the titanium. | Adhere to specified torque values for all fasteners to prevent structural compromise of the titanium sheet. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Hydraulic Cylinder Barrels, High-Pressure Manifolds, Valve Components in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||