This Titanium Grade 5 stock sheet is engineered for extreme environments, offering exceptional strength-to-weight ratio and unparalleled corrosion resistance. Its robust composition makes it ideal for critical pulling and lifting applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.323" |
| Length | 40" |
| Width | 48" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.323 inches in thickness, 40 inches in length, and 48 inches in width. It exhibits a minimum tensile strength of 120 ksi and a yield strength of 110 ksi, combined with excellent fatigue strength and a density approximately 60% that of steel. This makes it exceptionally suited for applications demanding high loads and minimal weight, such as specialized rigging, crane components, and winch drums in marine, aerospace, and oil & gas sectors where chemical inertness and durability are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of any contaminants prior to fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys to maintain material integrity. 3. Implement welding procedures specific to Titanium Grade 5, employing inert gas shielding to prevent contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling for cutting or forming. | Employ specialized carbide or diamond-tipped tooling designed for titanium alloys to prevent excessive heat buildup and tool wear, ensuring clean cuts and preventing material embrittlement. |
| Inadequate post-weld inspection for critical applications. | Perform thorough non-destructive testing (NDT) such as X-ray or ultrasonic inspection on all welded joints to detect any potential flaws or defects that could compromise structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom rigging components for offshore platforms, Lightweight winch drums for marine winches, Specialized lifting lugs for aerospace equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||