This premium Titanium Grade 5 stock sheet offers exceptional strength, low density, and excellent corrosion resistance. Precisely manufactured to demanding specifications for critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 40" |
| Width | 12" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.313 inches thick, 40 inches in length, and 12 inches in width. Exhibiting a minimum tensile strength of 120 ksi and a yield strength of 110 ksi, it boasts a density of approximately 4.5 g/cm³. This alloy's biocompatibility and resistance to pitting and crevice corrosion make it suitable for extreme environments in aerospace, marine, chemical processing, and medical implant industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper handling and clean surfaces prior to fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Follow established welding procedures for Titanium Grade 5 if required, ensuring inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive wear and heat buildup. | Employ specialized carbide or high-speed steel tooling with appropriate coolant and cutting speeds for titanium. |
| Inadequate weld shielding gas, leading to oxidation and embrittlement of the weld zone. | Utilize a high-purity Argon shielding gas at an adequate flow rate to prevent atmospheric contamination during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance sporting goods.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||