This Titanium Grade 5 stock sheet is engineered for high-performance industrial applications requiring exceptional strength, low density, and excellent corrosion resistance in aggressive environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.273" |
| Length | 43" |
| Width | 17" |
A proven choice for industrial professionals, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers superior performance with a thickness of 0.273 inches, a length of 43 inches, and a width of 17 inches. Its exceptional strength-to-weight ratio, combined with excellent fatigue strength and corrosion resistance, makes it ideal for aerospace components, medical implants, marine hardware, and chemical processing equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and machining tools are appropriate for titanium alloys. 2. Clean surfaces thoroughly to remove any contaminants before joining or further processing. 3. Follow recommended welding procedures for Titanium Grade 5, if applicable, ensuring proper shielding gas and heat input.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling. | Employ specialized carbide or high-speed steel tooling with ample coolant to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation before welding. | Thoroughly clean the joint area with a degreaser and wire brush to remove oxides and contaminants, then immediately weld under a protective inert gas shield. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance marine hardware, Chemical processing equipment, Medical device fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||