This Titanium Grade 5 stock sheet provides exceptional strength and corrosion resistance. Measuring 0.230" thick, 35" in length, and 26" in width, it is engineered for critical applications demanding high performance and durability.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.230" |
| Length | 35" |
| Width | 26" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (UNS R56400) stock sheet boasts a nominal thickness of 0.230 inches, a length of 35 inches, and a width of 26 inches. This alloy, also known as Ti-6Al-4V, exhibits a superior strength-to-weight ratio, excellent corrosion resistance, and good weldability. Its mechanical properties make it ideal for aerospace components, medical implants, marine hardware, and high-performance automotive parts requiring exceptional toughness and reliability under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and forming tools are clean and specifically designated for titanium to prevent contamination. 2. Accurately measure and mark the sheet according to precise design specifications. 3. Utilize appropriate cutting methods such as waterjet, plasma, or abrasive waterjet cutting, maintaining adequate coolant flow. 4. Carefully deburr all cut edges to prevent stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling for cutting or forming without proper precautions. | Employ specialized carbide or diamond-coated tooling, or utilize non-contact cutting methods like waterjet to avoid contamination and excessive tool wear. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all edges using appropriate tools to remove sharp edges and potential stress concentration points. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace Structural Components, High-Performance Marine Hardware, Medical Implants & Devices, Automotive Performance Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||