This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical components in demanding heating and cooling systems.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.230" |
| Length | 25" |
| Width | 23" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet boasts a nominal thickness of 0.230 inches, with precise dimensions of 25 inches in length and 23 inches in width. This aerospace-grade alloy offers an excellent balance of high strength, low density, and outstanding corrosion resistance, particularly in aggressive environments common in HVAC. Its biocompatibility and inertness also make it suitable for specialized cleanroom or medical gas handling applications within climate control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of surface contaminants. 2. Precisely cut to the required dimensions using appropriate tools for titanium. 3. Fabricate or join using methods suitable for Titanium Grade 5, adhering to industry best practices for welding or mechanical fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools on titanium. | Utilize specialized carbide or diamond-tipped cutting tools designed for titanium alloys to prevent premature wear and ensure clean cuts. |
| Inadequate cleaning before welding. | Thoroughly degrease and clean the weld area to prevent contamination, which can compromise the integrity of the weld in titanium. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Heat exchanger components, Condenser coils, Ductwork in corrosive environments, Specialized air handling units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||